Why Should You Master Your Record?

whymaster

Why do you need to master your album, does it not sound fine the way it is?

There is a simple answer to that. No it doesn’t . Chances are your album needs mastering and not by the guy who produced, mixed or recorded it. It needs to be mastered by a real, dedicated, experienced Mastering Engineer. Look at almost any album you own. Its probably been mastered by someone who’s a full time Mastering Engineer. Almost 100% of the top 100 albums (current and of all time) have been professionally mastered. Is your album recorded so much better than those?

Mastering is one the most misunderstood part of the audio production process. Its importance is often overlooked and mastering becomes an afterthought. In reality, mastering is extremely important. So why is it the one stage that some people seem willing to compromise on? You’ve spent so much time and effort writing, recording and mixing your music. Why would you sacrifice all of that work to sub-par or no mastering?

Mastering is more than just making it louder. It’s a third party, an objective ear. A Mastering Engineer is someone who knows how to make your collection of songs an album. Mastering is not just adjusting the way your music sounds but also the way it feels. Only in a properly tuned room with the right gear can a mastering engineer ensure that your music has the right feel. There is a metaphysical aspect to mastering. You start with an intention to your music and during the production, recording and mixing process that intention can get further and further away. Mastering can help push your album back toward that intention.

Mastering rooms are much more accurate listening rooms than most recording or mixing rooms. The acoustic design on the room is one of the most important parts of mastering. A good mastering room sounds better than anywhere else, yet translates to any system. If it sounds good in the mastering room it should sound good almost anywhere. Only a room specifically and professionally designed for mastering can sound like this.

Recording is taking the instruments and vocals and putting them on individual tracks and mixing is taking the individual tracks and putting them down to two left and right stereo tracks. Mastering is taking the stereo tracks and putting them together to make an album. It’s the polish on the gemstone, the finish on the deck. It also can be the nail in the coffin. Bad mastering is worse than not mastering at all.

400px-Lindos4.svg

The loudness of your music is a very important part of the mastering process. In fact, adding gain to the audio will affect the way it sounds and feels more than any other processing. Sometimes, a mastering engineer will use EQ just to adjust the sound back to the way it sounded before it was made louder.

The reason for this is the Fletcher-Munson curve;

the way your brain hears the music at different volume levels. This is not only applied to speaker volume but to the gain applied to the mastered audio. When you change the dynamic relationship of the music, you also change the tonal structure of the audio.

Any audio engineer can make an album loud. It’s about how you get loudness. Gain staging, compression, peak limiting and converter clipping all add to loudness and sound different. A good mastering engineer will know the best combination to use (or not to use). Sometimes doing almost nothing is the best thing for the project.

Look at these two example waveforms:

A:Why-should-you-master_img_0-300x71 Why-should-you-master_img_1-300x71 B:

They are the same song but would you believe they both sound as loud as one another?

A one has more dynamics, more air and more space. Sounds better on the radio, your iPod and on your stereo. It makes you feel better when you listen to it. This one has been properly mastered using an expensive high quality analog/digital hybrid mastering chain and an experienced mastering engineer.

B is hyper-compressed. When you listen, it gives you ear fatigue and makes you feel uneasy. It has been mastered unprofessionally using all plug-ins. Not to say plug-in mastering is all bad. There are some great mastering plug-ins. However, if plug-ins are the studios only choice for mastering, you may want to question how dedicated the facility is to mastering. Does the engineer do mixing one day and mastering the other? A dedicated experienced mastering engineer will bring a specialized set of skills and tools to the mastering process.

Why should you master your album? You should master your album because you care about it, because you put your heart and soul into it. A mastering engineer has dedicated audio skills, a proper room and very expensive gear just to ensure that no harm comes to the integrity of your recording. Your music is worth mastering… and needs it.

George Graves, Master of Masters

george31As spoken by George, written by Darryl Webster

One afternoon as a kid growing up in Southern California, my school took us to see the orchestra. We were seated in the balcony and I was fortunate enough to be in the front row. I quickly found myself so engrossed in the music, I was literally hanging over the balcony. Had it not been for the protective glass, I surely would have fallen to the level below. It was like an awakening. At that moment I knew my life would be one of music.

In the mid 1960′s I found myself working as a mastering engineer with RCA records. It was a good gig, but their philosophy regarding mastering was very ‘A to B’, more mechanical than artistic. I left RCA for one of the first independent mastering studios of its kind, DCT recorders run by Hank Waring. In those days, if you were an independent, you needed to come up with your own sound. Whether it be EQ, extra limiting, whatever, you had to experiment and find your edge over someone else’s cutting. Hank ‘s thing was he could cut it louder than anyone else.

george7

I liked loud, but there is loud, and then there is clean. When The Mastering Lab came along making recordings which were both loud and clean, people quickly started running over to them.

One Summer’s night after work I walked over to The Mastering Lab and knocked on the door. A heavily bearded man by the name of Doug Sax opened up, complete with the single longest hanging-ash I’d ever seen on a cigarette. We began talking, and eventually I asked him if it was possible to get a job there. He said “maybe.”

So every day after work I went over to the mastering lab and hung out. I would be there about three hours a day, just hanging around. After about four to six weeks of this Doug finally said; “I’ll tell you what. I’m gonna play you something and you tell me what you would do.”

As we listened I said; “I would take 2 db off at 40 hertz and put 2db on at 15k.” Doug got out his book, looked up and said “that’s exactly what I did.” (I should probably mention, that song was ‘Won’t get fooled again’ by The Who). This was the thing about The Mastering Lab that made it so fun. Their clientele. It was so high-end. Glyn Johns would fly in from England just to master. George Harrison hung around and played piano in the Bud Wyatt room while his album was mastered. It was a truly amazing time.

Meanwhile up in Toronto, Jack Richardson was starting his own mastering facility named J.A.M.F. With an invitation north and the promise of a Bud Wyatt built room, I decided to move my wife and two young children to Canada in the (season?) of 1974.

george8

After a good start in Canada, the work eventually dried up and I found myself working at Carling O’Keefe brewery in the refrigerator, stacking kegs for eight hours a day and loosing weight. It was an out-of-the-blue phone call from Paul Gross at Phase One that changed things for good. Their disc cutter was in the hospital and Paul asked if I could help them out. At Phase One I was grinding out 16 to 18 sides a day, I was really flying. The studio manager eventually remarked; “I’ve never seen so many lacquers go out of this place at one time.”

Paul Gross’s mastering room eventually moved to North York and became Lacquer Channel. I went in for three months and have been there ever since.

When you know what you’re doing you don’t have to guess. To me great mastering sounds original, clean, and natural. A little bit like the orchestra.

Audio Quality Matters

My name is Noah Mintz and I’m a mastering engineer.

A few years ago my two kids, who were 12 and 14, said to me something that I’m very used to hearing. “Dad we’re bored.” I usually respond with “that’s not my problem find something to do” but this time I did some actual parenting and made a suggestion to them I said “why don’t you listen to some music” they looked at me puzzled as if I should continue. They said “and…” “And nothing” I said. They said, “Listen to music and do what?” I laughed. I said, “nothing else, just listen to music”. They continued with the puzzled look like I was out of my mind. Then something clicked. I think they got it. They then proceeded to grab the laptop, loaded up youtube and started watching music videos while listening through laptop speakers. Ugh, who’s kids are these? I closed the laptop. “No”, I said. “Not on youtube. On a record or iTunes or on your iPod or on CD”. Again the puzzled look. “What are we going to do with our eyes?” “Nothing! You don’t need them” I waited for the ‘I get it’ look but it didn’t come. These kids had no idea how to listen to music as a thing… the only thing.

When I was a kid,

photo1-281x300

and believe it or not, despite my boyish looks, I was a kid in the 70s, we used to anticipate the release of a new album. Sometimes we’d line up at the record store to wait it’s opening. Once we purchased the record we’d usually head home to listen to it. Other than study the liner notes and the album artwork, we didn’t do much else but listen to that one album. Usually 4 or 5 times over on the first listen. Our exposure to music was limited to the living room, bedroom, the car, concerts, bars and street corners. We didn’t have access to mass libraries of music other than our parents collections, and at that, only the most privileged kids had parents with any taste in music.

Though it’s trite to say, that was a different time. Up until the 80s portable music was a transistor radio, certainly not many people got any sonic auditory enjoyment from that (though the experience was fun). Today, we listen to more music than ever before in history. Music has become a literal soundtrack to every minute of our lives.

I was watching a talk recently and someone in the audience asked if we could embark on an embargo on involuntary music. He suggested that music is everywhere, in the mall, the workplace, home, elevator and the bathroom. We are rarely in silence. He asked “What is wrong with silence”. If we have music all the time does it have any value? In the same respect, does audio quality have any value?

Listening to music is like working a muscle. You need to isolate it and actively work it. The idea of active ears and passive mind. The more you work this muscle the more you’ll enjoy music. The more you enjoy music the better your life will be. Almost everything in this modern life conspires against the enjoyment of music but I’ll get to this point in a bit. Let me tell you a little bit about mastering.

1476504_10152059965143324_112044541_n

What is a mastering engineer? A recording engineer is hired to commit the instruments to multiple tracks and capture a performance. A mixing engineer takes the multi-tracks and blends them so each track combined together becomes a song. I used to think that mastering was taking all the individual songs and making them into an album. To treat and process the mixed music or ‘program material’ as we call it, with EQs and compressors to change it’s frequency and dynamic relation respectively and respectfully. To shape the music so it all fits together into a sonic template. While this is all true, I’ve come to realize after over 15 years of mastering that this is only a very small part of my job.

Recording and Mixing engineers have a really tough job. It’s extremely time consuming and difficult to do it and more so to do it well. Its long hours and often low pay. These engineers are constantly turning knobs, pushing buttons, moving faders, tweaking the sound till each instrument sound right and fits into it’s perspective sonic space. I’m here to confess to you that a mastering engineers job is actually very easy. It’s doesn’t take very long and we bill a lot of money for it. Sure, we have very expensive equipment and painstakingly accurate tuned rooms, but essentially the mastering engineer only has one job and it’s not difficult to do at all. A mastering engineer is paid to listen. Out of a 6 hour job, I spend about 5 hours listening and only about 1 actually physically doing anything. That’s not to say there isn’t a lot of skill in my listening. For the most part I’m listing for something or rather I’m listening to decide what to do with that 1 hour of actual sonic manipulation. The more years I have under my mastering belt the more skilled I get at listening. Four years ago that 5 out of 6 may have been 6 out of 8 and in four years it might be 4 out of 5.

The fact that I spend an enormous amount of time in my job just listening it got me thinking about listening to music in general. How much does listening have to do with appreciation of music. How are we listening to music? Are we really listening to music at all? When was the last time you put on an album and did nothing else but listen to it? I don’t mean sit down and surf on your laptop, eat a meal or have sex, I mean just sit or lie there on the couch and do nothing but listen to an album. A music project you worked on doesn’t count.

InsideTrack4_l

I’ve been calling myself a mastering engineer since 1996. Really those first few years would have been more accurately called a ‘mastering engineer’ with finger quotes, given the method and tools that I used. The years between 1996 and 1999 were probably some of the most interesting times in digital mastering. We saw the introduction of some of the most important and influential tools in digital mastering during that time. The TC finalizer and it’s multi-band compression function. The Waves L1 introduced the masses to digital peak limiting and lay the foundation for the future loudness wars. Plugs-ins were introduced. First as premier non-real time versions. I remember mastering an album with a plug-in called the Ionizer which featured 512 bands of dynamic EQ and only being able to preview 1 minute of audio. All that the remaining 32 megs of RAM in my Power Computing mac clone would support. Then, when Real-time VST and Direct-X plugs became available, that was a game changer. All-of-a-sudden, practically overnight, a whole crop of engineers bought or downloaded a Waves plug-in bundle and started calling themselves mastering engineers. It was the start of home-mastering. Up until that point it was pretty much impossible to do mastering at home. It’s also where mastering went in a wrong direction.

While not a bad thing in theory, the new portability of mastering aided to further disambiguating the meaning of mastering. I will contend to say that only a dedicated mastering engineer, working out of a real mastering studio has any business doing mastering… but this is getting ahead of myself here and despite being a pure-bred mastering engineer this article is not about mastering per-se. Its about sound. How and why we listen to music and the importance of well produced, recorded, mixed, mastered and format of audio.

I’d like to make an analogy. Let’s say you went to a supermarket and bought two apples. Both apples picked at the same time, one from an organic farm and the other from a GMO-pesticide-laden-faceless-1%-corporation factory farm. If you ate both of those apples, I would think that they would probably taste more-or-less the same. You’d probably get the same short term enjoyment out of both of them.

apples-photography-design-wallpapers-copy

If you didn’t know which one was which you’d probably not be able to guess. I’ve tried to tell the difference between organic and non-organic apples and really, I honestly don’t think they taste any different given age and other factors like ripeness being the same. But there is more to food than taste. Food is fuel. The better the fuel the better the body runs. I believe that if you eat more organic food, absent of pesticides and additives our bodies will know the difference. Over time it’s healthier for us and we’ll be happier for it. We’ll lead more joy filled lives. The more organic apples you eat, the more your body will crave them. Perhaps, and I’m just guessing here, the more non-organic-pesticide-laden apples you eat the more your body will crave a Twinkie.

Know where I’m going with this? Music that is poorly recorded, mixed and mastered, then jacked up to impossible levels adding a whack of audible and inaudible distortion and then further destroyed by lossy data compression such as MP3 encoding is the same as that non-organic-GMO-pesticide-laden-faceless-1%-corporation-factory-farmed apple. You might not notice the difference but I’m thinking your body will.

Sometime in the 80s, Rupert Neve, the famed audio console designer said, somewhat joking of PCM 16-bit 44.1khz CD quality audio, that it may be responsible for some of today’s delinquent youth problems. This was due to the way the CD

Player handled frequencies above 20khz which is the upper limit of CD Audio. If that’s the case, could you imagine what prolonged listening to MP3 audio would do, which is far more frequency manipulated than any 80s CD player? MP3 might be responsible for creating a new breed of serial killers!killer

I’m not saying this is the case and I don’t actually have any proof that it is… for now it’s just a feeling. A hunch that MP3s might actually harm us if not make us hate music. Frankly, given the amount of time I spend listening critically to music, I’d like to think my hunches are as good as anyones educated guesses.

I have this thought about ‘active ears and passive mind’. It’s born from an experience in mastering. Up until I became a mastering engineer I was a vivacious listener of music. Music was my life. But something funny happened after a few years of mastering. I stopped casually listening to music. In the car I’d listen to talk radio or books on CD. At home I’d listen to nothing. Music became associated with work. I discovered after a period of time that I was going into work mastering albums but I never actually listened to them. When I’d hear them outside of the mastering studio, like on the radio, at a bar or store, I wasn’t familiar with the music. The mastering I did on them was good but I never took any time to enjoy the music. To listen to it without thinking about frequencies and what I was going to do with to it. Once I realized this, I tried something different. As soon as I started my session, I listened to the album from beginning to end. I didn’t think about it, I didn’t analyze it. I turned off my monitor and meters, sat back and just listened. I turned off the part of my mind that was working.

With this new found philosophy I went home and tried to do the same thing. I found it quite difficult. To just sit there and listen to an album with no purpose. For no reason other than to listen it was almost impossible. Why was I thinking this way?

I had to retrain myself to listen to music. At least a couple times a week I’d put on a record and do nothing but listen to it. After a short period of time I really enjoyed doing this. However, I could do this only with a vinyl record or a CD. If I listened to MP3s I found myself getting restless. It sounded the same but didn’t make me feel the same. I was curious about this.

Let’s assume, for the sake of argument, that the better the quality of the source of the music the more you’ll enjoy it. Both consciously and unconsciously. Access to inexpensive high-end equipment in the recording and home listening department is unprecedented. We’ve never had it better in that regard. Yet we allow our music to be delivered to us in a highly compressed format. Robbed of many of the frequencies that make for whole music. (think about the whole food thing here). This is not an audiophile argument I’m trying to make. It’s not so much about the ears as it is about the body.

Another issue is that we often listen to music at home from laptop speakers, TVs, small i-pod speakers and phones. I’m not saying you need a $100,000 system to listen to music but at least a proper set of speakers would up the enjoyment. We think nothing about dropping cash on the latest HDTV set yet we’re content with MP3 formats and terrible speakers. Add to that, sub-par mastering cheap mastering (had to get that shot in there), no wonder we’re all starting to care less about the quality of music.

I contend that if you give people music as low-quality audio they will then give it no value. Why not steal it if it’s worth nothing? Maybe, in some small way, higher quality audio can save the music industry?

Encoding, specifically lossy encoding , I believe is one of the most important issues contributing to the destruction of audio quality. Here is an explanation about the difference between lossy and lossless and PCM encoding.

PCM is audio encoded in a linear fashion with no loss of information. CD audio is an example of this. Engineers use DAWs (Digital Audio Workstations) to record with audio in PCM. PCM can be either 16 or 24 (or 32b float) bit-rates and 44.1, 48, 88.2, 96 (or sometimes 192) khz sample-rates. Generally, given decent engineering, the higher the bit and sample rate, the higher the fidelity. Does 24bit 96khz sound better than 16bit 44.1? An entire lecture can be dedicated to arguing this but I would say, to my ears, yes. Sometimes it’s not just an audible thing but also a whole body feel thing. I just know it’s better. I feel more relaxed, less-stressed and I get more enjoyment out of higher resolution audio.

Lossless encoded audio is encoded from the PCM and only the data removed is what can be replaced in full with no loss of signal quality. To me this sounds as good as PCM. Lossless file size is about half the size of PCM. Examples of PCM are FLAC and Apple Lossless Encoding.

Lossy encoded audio is also usually encoded from the PCM. MP3 and AAC (iTunes) are the two most popular formats.  The basic principle behind lossless encoding is a process called perceptual encoding which relies on the auditory observation that the dominant frequencies mask sub-dominant frequencies so those quieter frequencies are removed from the data stream therefore making the file size smaller. maskierung

I think lossy encoded audio just doesn’t sound right. There is something wrong with it and I can’t empirically tell you why. I’ve done a number of experiments and I’d love to give you a scientific reason why it doesn’t sound right but I can’t. It’s just missing something. There is no way you can take a file from 40 megs, reduce it to 5 and still retain it’s presence, the soul of the recording. Lossy encoding audio is soul-less.

PCM Digital copies are all the same. No matter how many times you copy it, the same information will be there. This is the purity of digital. With lossy encoding there is probably more variation in digital then there is in analog. Of course, every hi-fi system has different playback frequency response and sound different. That’s been the same since the dawn of recorded time but you could be pretty sure that the source LP and CD that you were playing had virtually identical frequency output from the master and it’s copies. MP3s and lossy encoding changes that game. Every encoder sounds different. It represents the audio differently even before it’s output. The artist has no control over this. We’ve gone so far from quality that we’ve accepted in the past.

We can look at countless graphs and do blind listening tests but how do we qualify what the brain hears and how audio quality makes us feel?

There are steps, albeit small ones that the industry is taking to at least start to have better quality audio delivery. One of these is mastered for iTunes [read my blog post on MFiT here]. For the most part, mastered for iTunes is a set of guidelines. Some rules of mastering that will lead to less distorted recordings and encodings. They even include a tool that will tell you if your pre-encoded master is clipping at all. Apple also include a tool that will let you audition exactly what the audio will sound like after it’s available on iTunes. The same encoder as the iTunes encoding factory is available to the artist and engineer. They also allow the artist to submit a 96khz 24bit master and the encoding is done in a two step process. One for sample-rate conversion and another for lossy encoding. Of course this all depends on proper recording, mixing and mastering but that’s a whole other discussion.

In the mean-time, until high-res audio is readily available try this; Put on the high-res, vinyl record or CD version of an album and listen to it from beginning to end. Then, put on the same digital mp3 version. (Fleetwood Mac’s Rumours is a great album for this). Forget how it sounds, how do you feel after each listen? How is your relaxed state, your mood and your stress. How much more or less do you like the album? Do you wan to listen to it again? Try it multiple times and in different states of mind.  Please let me know if you can. Try to loose your preconceptions and bias’s. If the MP3 feels just as good as the CD version I’d love to hear about that.

The Howie Weinberg Mastering App

Howie Weinberg Mastering App

One might think, that I might think, that an iPhone mastering app is a total contradiction of everything I stand for as a mastering engineer.  You might also think that the fact, that it’s released by one of the most respected engineers in the business might make me say that he’s a complete sell-out to the profession and art? If so, you might be right but I paid the $2.99 and downloaded the Howie Weinberg Mastering App and put it through its paces so you don’t have to.

First off, the sell. It’s apparently very ‘ultimate’. Can’t get better than ultimate.

Upon opening the app, the first page just has instructions. Actually, it’s four pages of instructions. Like you’re going to read them? I didn’t and then I couldn’t figure out how to upload a song to the app and stop the Crystal Method song that was pre-loaded from playing.

After some fiddling I figured out if you went back to the beginning instructions and then went forward again, there is a download screen. You can download from dropbox or from your iTunes library.

I put a 24bit/96khz unmastered file into my dropbox and downloaded it into the app. To my surprise, it supports the high bit and sample rate file. Kudos!

Next, it asks you what genre of music the file is. They are divided into; Acoustic, Electronic, Hip-hop, Pop, Rock and Spoken Word. I was a bit surprised about Spoken Word. After 16 years of mastering I’ve never been asked to master spoken word but I’ll tell you if Art Garfunkel Malcom Galdwell ever asks me to master up one of his audio books, colour me excited.

Frankly, I feel that more thought could have been put into the categories. If it were my app I think I would have done it this way: Laugh Tracks, Music For Robots, Polka, Kanye West, Autotune, Lambs Saying “Yeah”. I believe this would be a lot more relevant and more appropriate for this app.

suggestions

Howie’s Choice                                                                                               Noah’s Choice

Once you choose your genre you are taken to the setting pages. This is where the mastering magic happens.

The settings are separated into four EQ pages; Bass/Low (or Bottom/Thump for Electronic, Pop and Acoustic), Midrange/Presence, Grit/Push, and Air/Ultra-highs – and one compressor page. This all makes sense to me except Grit/Push. Having never used those words for mastering before I can only wonder why 3k-10k is considered gritty or pushy. I’m going to let your imagination run wild on that one.

I loaded in my song. “Small Fires” by my old band Noah’s Arkweld. This song features Simon Wilcox on vocals and co-write. On each setting page there is a Howie Helps button. When you push it you get a little pop-up bubble on Howie’s face telling you different words of encouragement and then it does an EQ curve or compression setting for you. I don’t really know how it comes up with the results but I’m guessing Howie is not sitting in a cubicle waiting to audition the file and then giving suggestions.

whatwouldhowiedo

I ran Howie’s recommended settings on the song. I mean, this is “what Howie would do” and he also “Thinks it will sound great” so, how can I go wrong? This guy has 40 years of experience. In fact, he actually mastered my band’s 2nd album in the 90s and did a great job.

IMG_4564

The compressor page was a little more tricky. Howie only gave a starting point. He also mentions that a compressor is not always needed which might suggest some sort of integrity built into the app but in reality is probably there because they are expecting people to put in already loud-as-possible music and adding a compressor will just distort the hell out of it. So saying “It is often not needed” is the same as saying if it makes it sound worse, just take it off. I left it on. I don’t want to fuck with greatness here.

The last page is the “render” page. Here you can upload to soundcloud or send to email or text. The send to text doesn’t actually do anything. It just sends the people you text a message that you’re using the app and a link to download the app from the iTunes store.

Unless it’s a really short song, the email link doesn’t work either. Most email servers don’t accept a file over 25megs.

As a last resort I tried soundcloud. I kept getting the message “Ok, that went wrong”. So here I was with my mastered file and no way to get it off the phone.

Then, I was able to figure out that if you went back to the first screen where you picked the song to master, you could pick the song that’s already mastered and instead of clicking “Start Mastering” you could click an upload button and send it to dropbox. Whew.

How did it turn out? Could $2.99 rival $300 an hour? (Or whatever Howie is these days). Well… it sounds pretty much how you’d expect, unlistenable garbage but it could be worse.

Howie Weinberg is one of the best mastering engineers ever. The list of classic and amazing albums he’s mastered is almost endless.  From his days as the main guy at Masterdisk in NYC to now running his own studio in California, his career is aspiring and to be envied. This is why it boggles my mind that he would risk this reputation of excellence and release this app. If not for just the possibility of monetary gain what purpose does it provide? It’s not just innocuous it’s damaging and here’s why;

As technology progresses, the art of mastering will change. No doubt there will be more plug-ins, digital tools and even automated processes that will be used in the mastering process. I’m not holding on to old ways for the sake of tradition or stubbornness. We all know that an automated app cannot replace a real mastering engineer and I don’t think this Howie Weinberg Mastering app intends to do that.  My issue is of what this app represents. Which, to me is irresponsibility. Our job, as mastering engineers is not only to take your unmastered tracks and make them sound as best they can but it’s also to educate the listening public on how important sound quality is. The positive experience of listening to well recorded, mixed and mastered music is evidence unto itself that quality audio matters. The more steps we take towards lifeless robotic engineering – even as a novelty, is the closer we get to taking the very thing out of music that helps us appreciate it.

Noah Mintz.

Why Master In Canada

Many a Canadian producer will have musicians record in Canada, mix in Canada, but might suggest an album be mastered in the US. Why?

The world’s most celebrated mastering studios are in New York and southern California. You’ll find more credits from these few studios than all the other mastering studios combined. These studios also have top-tier gear specifically made and customized for mastering. The rooms have been designed by top acousticians and sound acoustically neutral. Their engineers have decades of experience.

So with all of that why wouldn’t your Canadian producer have you master outside of Canada? Because the producer doesn’t realize (or believe) we have all of this in Canada. Well we do, and in abundance from coast to coast.

HERE’S WHAT THE PRODUCER (OR YOU) MAY NOT KNOW:

We have celebrated engineers with multiple gold and platinum albums under their belts:
Lacquer Channel (Toronto)’s own George Graves has mastered some of the best and most-recognized albums ever made and is one of the most experienced engineers anywhere.

We have mastering suites that rival the best rooms in the world:
Joao Carvalho Mastering (Toronto) boasts one of the most beautifully designed rooms, reputed as “the most accurate listening environment known.”

You can get world class mastering on both coasts.
Archive Mastering (Halifax) and Suite Sound Labs and Zen Mastering (Vancouver) discographies feature some of the best Canada has to offer.

The gear used in Canada’s mastering studios is the best anywhere.
The AD/DA converters used at Lacquer Channel, – Lavry Gold, Prism, dCS, Burl and Forsell, – are the same that are used at Gateway Mastering (by Bob Ludwig) and New York City’s Sterling Sound. Greymarket Mastering (Montreal) has a custom-designed EQ by Barry Porter, one of the most reputable EQ designers. Silverbirch Mastering (Toronto) has an Ampex 1/2” tape machine with customized Class A Aira electronics.

Some of the coolest, best-selling, and highest profile Canadian artists of the past five years have been mastered in Canada:
Death from Above 1979 (Joao Carvalho), Handsome Furs (Harris Neumann), Joel Plaskett (J. La Pointe), Neko Case (Peter Moore), The Waking Eyes (Phil Demetro), RUSH (George Graves) and Broken Social Scene (Noah Mintz) have all had past recordings mastered here in their home country.

You can get a Vinyl Lacquer Master cut in Canada:
Lacquer Channel Mastering is the only place in Canada you can get a lacquer cut with our Neumann VMS-80 Lathe.

Overall, I can’t see any reason not to master. Kudos to all those Canadian producers (and labels, studios et al.) who encourage and build relationships with our many amazing, world-class Canadian mastering engineers and studios.

Here is a list of mastering studios in Canada: (Let me know if I’m missing any)

Toronto
Lacquer Channel Mastering

Joao Carvalho Mastering
Silverbirch Mastering
Wreckhouse Mastering
Heading North Mastering
E Room Mastering
Metalworks Mastering
Halifax
Archive Mastering
Montreal
Grey Market Mastering
Trillium Sound Mastering
Karisma Sound
Sonosphere
Ottawa
Sound Master Studios
Calgary
Infinite Wave
Winnipeg
Outta Town Sound
Vancouver
Suite Sound Labs (Vancouver)
Zen Mastering (Vancouver)